Financing available for online purchases* Learn More
PRO X 660
COMMERCIAL STAND-ON MOWER
Item#:
53AI8CSU050
Financing Available
$10,599.00
Financing Available
PRO X 660
COMMERCIAL STAND-ON MOWER
Item#:
53AI8CSU050
$10,599.00
Documents and Guides
- Commercial-grade 25.5 hp Kawasaki(R) FX801V (852cc) engine
- A fully fabricated 60-inch 10-gauge steel commercial deck shell with top bottom and side reinforcements plus standard 24" tires give you more ground clearance to easily hop on curbs.
- A large, fully adjustable suspension platform allows you to adjust tension and glide comfortably through tough terrains.
- High-performance commercial Hydro-Gear® PK 12cc pumps & Parker® TL 240cc wheel motors deliver quick response to the drive wheels and smooth control for cutting speeds up to 10 mph.
- 3-year limited commercial warranty (no hour limitations) and 5-year/1,750-hour limited deck assembly warranty.
You're shopping available inventory from
Browning Equipment, Inc.
800 EAST MAIN STREET,
PURCELLVILLE,
VA
20132
Delivering to:
20149
|
Attachments & Accessories
Specs & Maintenance
Engine
- Engine Brand Kawasaki®
- Engine Model FX Series
- Engine Model Number 801V
- Engine Displacement 852cc
- Engine Output 29.5HP
- Starter Type Electronic
- Fuel Tank Capacity 7.5 gal. US (28.4 L)
- Cylinders Twin
- Engine Start Ignition Key
- Engine Oil Capacity 2.0 qt. US (1.89 L)
- Lubrication Fully pressurized
- Charging System 15 amp regulated
- Fuel Gauge No
- Choke Separate Choke
- Air Filter High Density
- Oil Filter Yes
- Fuel Delivery Carburetor
Drive System
- Transmission 12cc Hydro-Gear® pumps / 240cc Parker® wheel motors
- Forward Speed 10 mph / 16 km/h
- Reverse Speed 5 mph / 8 km/h
Cutting Deck
- Deck Cutting Width 60 in
- Deck Material 10-gauge steel
- Deck Engagement (PTO) Electronic with quick reset
- Deck Construction 10 ga shell w/ 7 ga top & bottom reinforcement
- Spindle Construction HD 8" aluminum housing, 35mm double-row sealed ball bearings, 1-3/8" through-shaft and maintenance-free design
- Blade(s) Three 21" long high-lift Marbain blades, 1-1/2" of blade overlap
- Deck Lift Hand lever adjusting spring lift, pin selector for height
- Cutting Height Range 1.5”- 4.5”
- Anti-Scalping 2 front deck gauge wheels
Warranty
- Warranty 3-year / no-hour-limit warranty
- Deck Shell Warranty 5-year / 1,750 hour limited manufacturer’s warranty
Chassis
- Frame 2" x 3" full-length tube frame
- Front Axle 2" x 3" tube construction
- Front Caster Mount 3/8" thick steel
- Suspension Hand lever adjust, 3-position spring suspension foot platform
Controls
- Cruise Control NA
- Brakes Hand lever control / external band
- Steering Control Lap Bar Steering Wheel Control
Wheels
- Rear Tires 24"x12"-12"
- Front Tires 13x5-6" Reliance Run Flat carlisle
Dimensions
- Dimensions L/W/H 69" / 74" / 62"
- Weight (approx.) 1115 lbs
Additional Specifications
- Hour Meter Crew Boss
- Model Number 53AI8CSU050
Disclaimer
- Specifications Disclaimer Specifications subject to change without notice and without incurring obligation. Products depicted on website and other advertisements are for demonstration purposes only. Actual products offered for sale may vary in design, required attachments, safety features and non-functional appearance from. See other general disclaimers at the bottom of our website.
Model | Manual | Form Number | |
|---|---|---|---|
| 53AI8CSU050 | MANL:OPER:53A:STANDING:RIDER | ||
| MANL:OPER:53A:STANDING:RIDER | 769-21570A | Download | |
| MANL:OPER:53A:STANDING:RIDER | 769-21570B | Download | |
| MANL:OPER:53A:STANDING:RIDER | 769-21570C | Download | |
| MANL:OPER:53A:STANDING:RIDER | 769-21570D | Download | |
| MANL:OPER:53A:STANDING:RIDER | 769-25960B | Download | |
| MANL:OPER:53A:STANDING:RIDER | 769-25960C | Download | |
| SHEET:SUP:BILING:EPA:EVP:18-19 | 769-17171 | Download | |
| SHEET:SUP:BILING:EPA:EVP:18-19 | 769-23590 | Download | |
| SHEET:SUP:BILING:EPA:EVP:20-21 | 769-25879 | Download |