Instructions

Make sure all your parts are moving smoothly, but also make sure you tighten up the nuts and bolts that may have been shaken loose by use last season. Check out our article on snow thrower maintenance to learn more about taking care of your machine throughout the year.

Step 1 - Change the oil on your snow thrower.

This should also be done after the first five hours of use this winter and after every subsequent season.

Step 2 - Install a new spark plug if necessary.

Check your spark plug at the start of every season. It it has become dirty, it may just need cleaning. However, rust and corrosion on your snow thrower's spark plug will call for replacement.

Step 3 - Inspect belts for wear. Replace them if necessary.

It's wise to keep a few snow thrower belts on hand in your garage or shed so you can make replacements quickly when necessary. You can check out the top-selling belts from Cub Cadet to find what you need for your model. Any significant wear and tear merits replacement to avoid the danger and frustration of a belt breaking during use.

Step 4 - Drain the gas tank and replace with fresh fuel.

Make sure your fuel includes stabilizer so it stays fresh even if you have a few mild weeks during the winter and don't need to run your snow thrower.

Step 5 - Lubricate the drive and chassis.

Make sure all your parts are moving smoothly, but also make sure you tighten up the nuts and bolts that may have been shaken loose by use last season. Check out our article on snow thrower maintenance to learn more about taking care of your machine throughout the year.
 

After you've prepared your snow thrower for winter, start it up and let it run for a few minutes in a well-ventilated area just to be certain there are no surprises when it storms. Consider starting it every so often if it sits for an extended period of time. Learn more about Cub Cadet snow throwers and maintenance with our other How-To articles.

Parts Finder



Don't know your part or model #?

You can use the PartFinder to help find your model and the right part for your machine.

>Find Matching Models



Did you find this helpful?    
×