STEERING
Lap Bar / Steering Wheel Adjustment
Multi-position Quick-adjust steering column
Multi-position Quick-adjust steering column
2" x 2" spring-latch tool-less foldable 3 position
5/16" Thick Steel rear engine guard/pre-drilled mounting points for attachments with integrated rear hitch
2" x 3" solid axle tube with ISO dampening suspension and 1/2" thick steel front yokes
Fully welded, full-length 3/8 x 5" laser cut steel / integrated tie-down slots
High Performance Steering Wheel with electronic power steering & Foot-pedal Control
N/A
16" x 6.5" - 8" turf
Warner PTO Clutch (200 ft. lb.) with Soft-Start
High-back Air-Ride suspension with EVC cushion, padded arm rests, ISO mounted base (lateral suspension),angle back adjust and lumbar support,seat belt
Hand-operated lever with integrated hydro pump release lever
HD Low-profile throttle lever, sealed key switch & electronic fingertip engagement pto
26" x 12" - 12" (Turf Tread)
88" L x 73" W x 48" H
1580 lbs.
8" sealed cast aluminum housing (maintenance-free)
3 high-lift Marbain® blades / 18,500 fpm (approx.)
Foot pedal with spring assist
16 Positions
fabricated 7ga. (.187”) steel shell
1/4" (.250") steel
60" FABRICATED DECK
7ga. (.187") bottom plate
7ga. (.187") top plate
3/4" Thick UHMW-PE Replaceable Trim-side Wear Guard
1" - 5"
High-density, impact-resistant rubber
Steel - Tooless Quick Release
5/16"(.313) steel on trim and discharge sides
7ga. top plate
7ga. bottom reinforcement
¼” rolled leading edge
2 Front HD w/ Bushings & Grease Zerk
Intergrated into Side Pod
Standard electronic
3 year / no hour limit commercial warranty and 5 year / 1,750 hour limited deck construction warranty
Twin 7.45 gal. tanks (14.9 gal. total) with electronic fuel gauge
Fwd: 14 mph / Rev: 7 mph
35hp - 999cc
Kawasaki FX1000v
Parker HTG 16cc pump / 310cc wheel motor