Step 1 - Prepare the mower for maintenance

Make sure the engine is cool. Disconnect the spark plug ignition wire. Put the height adjuster at the highest level.


Step 2 - Remove the lawn mower wheel

Using a socket wrench, unbolt the wheel and remove it from the lawn mower.


Step 3 - Apply lubrication

Lubricate the new wheel's bushings with a dry lubricant, such as graphite.


Step 4 - Replace the lawn mower wheel

Tighten the wheel nut and adjust the height of the wheel to match the other three.


Step 5 - Ready the mower for operation

Reconnect the spark plug ignition wire. While running the mower for the first time on the new wheel, keep an eye out for vibrations or wobbling, which could indicate the lawn mower wheel assembly was not properly replaced.


You can order a proper replacement wheel for your machine through the lawn mower wheels page from Cub Cadet or enter your part number in the Parts Finder tool on the right. Use this guide to safely replace the wheel on your Cub Cadet walk-behind lawn mower. If the lawn mower wheel assembly is damaged, or you are unable to replace the wheel, contact your local service center. If necessary, they should be able to make more involved repairs to your walk-behind mower

Parts Finder

Don't know your part or model #?

You can use the PartFinder to help find your model and the right part for your machine.

>Find Matching Models

Did you find this helpful?