Instructions

Step 1 - Disconnect the spark plug wire

To ensure safety during any lawn mower repair, it's important to disconnect the wire. When changing the spark plug, you'll need to remove the wire to access the plug. Check the condition of the wire at this point as well.

Step 2 - Remove the old spark plug

Use a spark plug wrench and turn counter-clockwise to remove the old spark plug from the mower.

Step 3 - Change the gap on your spark plug

Check the gap on the new spark plug and use a specialized gap tool or a set of feeler gauges to adjust the gap between the electrodes to the appropriate distance as referenced in your operator's manual.

Step 4 - Install the new spark plug

Be careful not to cross-thread when changing spark plugs. You should be able to thread the spark plug in smoothly by hand for a few turns.

Step 5 - Tighten the spark plug

Use a spark plug wrench to continue tightening until the plug is firmly in place. do NOT over-tighten.

Step 6 - Reconnect the spark plug wire

Once you're done changing the spark plug, check for other lawn mower parts that need repair or replacement. Updating anything that needs maintenance with the help of our lawn mower repair how-to articles. Reconnect the spark plug and you're ready to go.

Parts Finder



Don't know your part or model #?

You can use the PartFinder to help find your model and the right part for your machine.

>Find Matching Models



Did you find this helpful?    
×