How to Replace the Wheel on a Cub Cadet Walk-Behind Mower
These instructions will explain how to replace a wheel on one of Cub Cadet's walk-behind lawn mowers. Over time the wheel can become damaged or worn out, reducing traction and possibly the alignment of the mower. Depending on your model, the instructions for lawn mower wheel repair listed below may vary slightly. Always be sure to check your operator's manual for detailed instructions.
Step 1 - Prepare the mower for maintenance
Make sure the engine is cool. Disconnect the spark plug ignition wire. Put the height adjuster at the highest level.
Step 2 - Remove the lawn mower wheel
Using a socket wrench, unbolt the wheel and remove it from the lawn mower.
Step 3 - Apply lubrication
Lubricate the new wheel's bushings with a dry lubricant, such as graphite.
Step 4 - Replace the lawn mower wheel
Tighten the wheel nut and adjust the height of the wheel to match the other three.
Step 5 - Ready the mower for operation
Reconnect the spark plug ignition wire. While running the mower for the first time on the new wheel, keep an eye out for vibrations or wobbling, which could indicate the lawn mower wheel assembly was not properly replaced.
You can order a proper replacement wheel for your machine through the lawn mower wheels page from Cub Cadet or enter your part number in the Parts Finder tool on the right. Use this guide to safely replace the wheel on your Cub Cadet walk-behind lawn mower. If the lawn mower wheel assembly is damaged, or you are unable to replace the wheel, contact your local service center. If necessary, they should be able to make more involved repairs to your walk-behind mower