Step 1

Place your mower on a flat, level surface. Turn the mower off and make sure the engine is cool. Remove the ignition key and disconnect the spark plug ignition wire.  Then, engage the parking brake.

Step 2

Remove the air cleaner cover from the top of the engine.

Step 3

Wash the foam element in mild detergent and water and allow it to dry completely.

Note: Never use gasoline or low flash-point solvents for cleaning the air cleaner elements.

Step 4

Apply a few drops of clean engine oil and squeeze out all excess oil.

Step 5

Replace the foam and paper elements.

Step 6

Reattach the assembled air filter.

Step 7

Replace the air cleaner cover and secure it with the wing nut.

Step 8

Reconnect the spark plug ignition wire.

Parts Finder

Don't know your part or model #?

You can use the PartFinder to help find your model and the right part for your machine.

>Find Matching Models

Did you find this helpful?